Discovery MR750 3.0T

ACCREDITATION TYPECE, ASRT - Technologists / Allied Health
COSTContact Us for Quote
COURSE LENGTH 10 Onsite Days / 10 TVA Hours

Interested in taking this course?

    Already registered? Login

    About this class

    This program instructs MR Technologists in the start-up operation of a Discovery MR750 3.0T MR system. Instruction is delivered in three sessions by a GE MR Applications Specialist at the customer’s facility. This training produces the best results when a core group of 4 MR Technologists is dedicated to the complete session. It is also critical that key Radiologists are available to review images In addition, the patient schedule should be modified for the onsite training segment to allow time for instruction. This program includes 10 hours of TVA (TiP Virtual Assist) follow-up.


    • TiP Applications On-Site
    • TiP Virtual Assist
    • Overview

      By the end of the program Technologists should be able to operate basic to intermediate system features and clinical applications on the Discovery MR750 3.0T system.

      Week One Agenda 

      Day One - Introduction to Discovery MR750 Basic System Operation

      • Working Safely
      • Discovery MR750 System Design Overview
      • Selecting Coils and Positioning the Patient
      • Introduction to the Discovery MR750 User Interface
      • Discovery MR750 Workflow Overview/Demonstration

      Day Two - Discovery MR750 Basic Pulse Sequence Review

      • Localizer PSDs
      • SE and IR Pulse Sequences
      • 2D/3D GRE and SPGR Pulse Sequences
      • 2D/3D FSE and FRFSE-XL Pulse Sequences
      • SSFSE-XL Pulse Sequences
      • FLAIR Pulse Sequences
      • 2D/3D TOF MRA Pulse Sequences
      • Fiesta and Fiesta-C Pulse Sequences 

      Day Three - Discovery MR750 Protocol Building / Patient Imaging

      • Introduction to Protocol Building
      • Discovery MR750 Patient Imaging -Session One

      Day Four - Discovery MR750 Neuro Imaging

      • Neuro Applications
      • Discovery MR750 Neuro Protocol Updates
      • Post Training and Documentation

      Week Two Agenda

      Day One - Discovery MR750 Body and Breast Imaging

      • Respiratory Triggering
      • Body and Breast Applications
      • Discovery MR750 Body and Breast Protocol Updates

      Day Two - Discovery MR750 Musculoskeletal Imaging

      • Musculoskeletal Applications
      • Discovery MR750 MSK Protocol Updates

      Day Three - Discovery MR750 Vascular Imaging

      • Vascular Applications
      • Discovery MR750 Vascular Protocol Updates

      Day Four - Discovery MR750 Introduction to Cardiac Imaging

      • Cardiac Gating and Triggering
      • Cardiac Applications
      • Post Training and Documentation

      Week Three Agenda

      Day One - Discovery MR750 Advanced Cardiac Imaging:

      • Advanced Cardiac Imaging Applications
      • Cardiac Post Processing and Analysis with ReportCARD
      • Discovery MR750 Cardiovascular Protocol Updates

      Day Two - Discovery MR750 Advanced Neuro Imaging:

      • Echo Planar Neuro Imaging Applications
      • Functional Imaging with BrainWave RT/PA
      • 2D/3D Spectroscopic Applications
      • Discovery MR750 Advanced Neuro Protocol Updates
      • Post Training and Documentation
    • Target Audience

      This course is designed for MR Technologists who operate the Discovery MR750 3.0T system

    • Prerequisites

      This course has no prerequisite requirements.

    • Schedule / Registration

      Please contact your GE Healthcare Representative for pricing and scheduling information.

    Preparing Your Staff for Onsite Training

    Preparing Your Staff for Onsite Applications

    Our experience clearly shows that the maximum transfer of knowledge occurs when no more than 4 of our participants work with the Applications Specialist throughout the entire training program.

    We advise that the personnel selected should fulfill the following criteria:

    • Relevant previous experience
    • Good knowledge of medical technology and terminology
    • Willingness to learn through meeting new challenges
    • Ability to communicate skills to others
    • Understanding of department routines

    From an operational standpoint your department will benefit most by selecting those who will be primary operators of the system rather than those in a supervisory/management role.

    Comprehensive preparation for the training program is essential to its success. Before training, selected personnel should:

    • Study the Operator's Manual delivered with your system
    • Ensure familiarity with relevant areas of technology and terminology through reading current literature
    • Have their normal duties delegated for the training period

    Preparing Your Department for Onsite Training

    Preparing Your Department for Onsite Applications

    Recommended department conditions:

    • Room construction should be complete and all necessary permits granted
    • System installation, calibration and performance testing is complete
    • Open house visits and other staff training are not scheduled
    • Instruction on ancillary equipment is completed before system training
    • Department routine is organized to minimize interruptions
    • Physicians and other personnel who may need to be present at times during the training are notified
    • Imaging accessories, archive media and other supplies are available
    • Patient exams are scheduled according to the training agenda

    Note: If for any reason your department is not completely ready, please do not hesitate to reschedule training. Incomplete preparation may compromise the quality of the program.

    About TiP Virtual Assist (TVA) Training

    TiP TVA Program Overview

    TiP Virtual Assist (TVA), a GE Training in Partnership (TiP) program, revolutionizes applications training with live, remote and interactive sessions conducted from hundred or even thousands of miles away. Powered by a high-speed broadband link, TVA allows the trainer to connect directly with the customer's imaging console for simultaneous observation of the screen, shared control of the mouse and two-way interaction by phone.

    Radiologists and Technologists feel like their remote trainer is actually there in person. The end result; a boundary-less education model combining the hands-on benefits of onsite training with the convenience of distance learning for improved productivity and enhanced knowledge retention.

    After installation of your new AW or DI system, a GE Applications Specialist will contact you to schedule a convenient time for training delivery. Total duration for each TVA program varies. Some programs are designed to be delivered in one "visit", while others are segmented into "modules" to help you better manage your training time. The agenda included in the TVA training packet you will receive describes the content of each module, the recommended delivery schedule, and the total contact hours per module.

    Preparing Your Department for TVA Training

    Prepare Your Department for TVA

    Optimal training results are produced when a core group of 4 Technologists/Radiologists are dedicated to the complete program. To ensure a learning environment without distraction, the patient schedule should be modified to allow full participation during the contact hours for each module. You will need to ensure that a telephone / speakerphone is available at the system, and that your system is broadband connected.

    CE Considerations for Onsite Training

    Continuing Education credit may be earned by Technologists who complete the training curriculums as presented by the Applications Specialist. The Applications training is designed to enhance learning, prepare the Technologists to provide the best patient care possible and to achieve particular learning outcomes or objectives. Planning for this training requires the use of certain content and instructional strategies.