|
|
|
|
Note: Course prices do not reflect the cost of the prerequisites. For detailed information click on the prerequisite course titles.
|
XR Digital Rad Systems Full Service (Class/Lab)
R0122RY 40 hours $14,315.00
Prerequisite Course Material:
Executive Summary:
The XR Digital Rad Systems service-training course is a blended course, consisting of self-paced eLearn pre-work and one week of in-residence class and labs. It will equip the student with the ability to install, operate, calibrate, and troubleshoot at a Full Service level.
The systems taught in the course include: Revolution XRd, Definium 8000, Optima XR640 and Discovery XR650.
Course Competencies:
Demonstrate safe practices and take appropriate safety measures against possible hazards while working with the systems
Operate the systems at the application level for performance evaluation of the system
Identify the features, functionality, and major components of the systems
Identify the basic setup and configuration
Identify troubleshooting techniques and tools
Identify the basic calibration procedures and how they are performed
Lab Activities:
Operation
Calibration
Installation information
Troubleshooting
Finding information in Service documentation
Course Date:
November 14 - 18, 2011
March 12 - 16, 2012
|
Brivo XR385 Differences Training (Web)
R0190RY 3 hours $2,100.00
XR Digital Rad Systems Full Service (Class/Lab)
Executive Summary:
The Brivo XR385 Differences Training web-based course is a differences course targeted for experienced Support Engineers who have already completed the Digital Rad Systems Full Service class. The purpose of this training is to give a high-level introduction to the system, highlighting what is unique and different.
Course Competencies:
Demonstrate safe practices and take appropriate safety measures against possible hazards while working with the systems
Operate the systems at the application level for performance evaluation of the system
Identify the features, functionality, and major components of the systems
Identify the basic setup and configuration
Identify troubleshooting techniques and tools
Identify the basic calibration procedures and how they are performed
Note: Moving forward this content will be covered in the Digital Rad Systems Full Service Class.
Course Competencies:
Identify the basic subsystems, components and their functions.
Identify safety precautions for the system.
Identify the high-level installation requirements for the system.
Fault/Isolate system errors using standard and advanced service documentation and diagnostics.
Identify key laptop procedures.
|
Optima XR220 AMX
R0191RY 2.5 days $4,015.00
Prerequisite Course Material:
Executive Summary:
The Optima XR220amx, XR200amx & Brivo XR285amx Full Service training is a blended course consisting of pre-work on the FlashPad, in-resident lecture/labs and an end of course exam on the next generation mobile X-ray systems. Before enrolling in this course, you must be XR Basic Service trained or have equivalent experience.
Course Competencies:
Identify the purpose and high level content of the System manuals.
Demonstrate safe work practices.
Install the system using appropriate tools, test equipment, calibration and safety procedures.
Operate the system at functional and operational software level to assess system performance and duplicate customer complaints.
Perform key system measurements, calibrations, configurations and adjustments.
Perform key planned maintenance and calibrations, including electrical, mechanical and other adjustments to keep the system performing within specified limits.
Fault isolate system errors using standard and advanced service documentation, tools, and diagnostics.
Remove and replace parts to repair systems at the FRU level using functional checks and performance tests to ensure proper operation.
Course Dates:
January 9 - 11, 2012
January 23 - 25, 2012
February 13 - 15, 2012
March 12 - 14, 2012
|
Wireless DR Imaging "Flashpad" (Web)
R0192RY 4 hours $2,100.00
Prerequisite Course Material:
Executive Summary:
The Precision 500D and Proteus Wireless DR Imaging Option System training is a web based training course. It introduces the wireless detector (FlashPad) to the Precision 500D and Proteus systems. The course is designed for Engineers and Biomeds who have attended R0138RY Precision 500D or completed R0128RY Proteus web training, and HAVE ATTENDED R0122RY XR Digital Rad Systems course. If the engineer hasn't attended R0122RY, they should purchase R0193RY Wireless DR Imaging (Class/Lab) instead.
|
Wireless DR Imaging (ILT) "Flashpad" (Class/Lab)
Classes Available in 2012
R0193RY 2.5 days $4,015.00
Prerequisite Course Material:
Executive Summary:
Wireless DR Imaging Option (Class/Lab) for Precision 500D and Proteus systems course introduces the wireless detector (FlashPad) to the Precision 500D and Proteus systems. This course is for those who have attended R0138RY Precision 500D Full Service training or completed R0128RY Proteus web training and have NOT attended R0122RY XR Digital Rad Systems course. The participants will learn the digital aspect of imaging as well as what is new to upgrade the current systems. Labs and supporting classroom discussion explore the specific functions and features of the wireless detector (FlashPad) on the Precision 500D and Proteus systems.
Course Dates:
January 30 - February 1, 2012
February 20 - February 22, 2012
|
Discovery XR650 & Optima XR640 Differences (Web)
R0184RY 4 hours $2,590.00
Prerequisite Course Material:
|
AMX-4 Full Service (Class/Lab)
R0103RY 24 hours $4,015.00
Prerequisite Course Material:
Executive Summary:
This course introduces the AMX-4 portable X-ray system. Upon completion of this course, the student will be proficient in the service and maintenance of this unit.
Course Competencies:
Upon completion of this course, the student will be able to do the following:
- Install the AMX-4 utilizing approved procedures and protocols
- Perform applicable functional checks
- Perform preventive maintenance checks
- Perform assembly/disassembly procedures; identify major component locations
- Safely service mechanical components using existing field service tools and procedures
- Troubleshoot to board/item level using appropriate service documentation, diagnostics, and peripheral test equipment
Course Date:
September 26 - 28, 2011
October 24 - 26, 2011
December 12 - 14. 2011
January 23 - 25, 2012
March 12 - 14, 2012
top
|
Definium AMX 700 Full Service (Class/Lab)
R0165RY 16 hours $2,665.00
Prerequisite Course Material:
Executive Summary:
This is a differences course for the digital, portable AMX-4 and Definium AMX 700. Training only includes the digital aspects of the system.
Course Date:
September 29 - 30, 2011
October 27 - 28, 2011
December 15 - 16, 2011
January 26 - 27, 2012
March 15 - 16, 2012
top
|
Proteus XR/a Service (Web)
R0128RY 9 hours $5,990.00
Prerequisite Course Material:
Executive Summary:
Proteus XR/a Training is a web based training product. It provides an introduction to the components, features and operation of the Proteus XR/a radiographic system offering information on the calibration, set-up, and basic troubleshooting for the Proteus XR/a. The test, which includes 4 test modules, should be taken after studying the web course material.
Course Competencies:
Upon completion of this course, the student will be able to do the following:
- Identify and list the features, options, and limitations of the Proteus system
- Use the laptop tool to troubleshoot and calibrate the Proteus system
- Use service diagnostic tools for troubleshooting the Proteus system
- Operate, calibrate, and troubleshoot the Jedi generator, AEC, and Proteus Collimator
top
|
RADIOGRAPHY PREREQUISITE COURSES
Revolution Digital Rad Systems Service (Web) $3300.00
R0161RY 7 hours
Executive Summary
The systems taught in the course include the following:
Revolution XRd-2X (Lightning)
Definium 8000 (Thunder)
Completion of this web course (including the test) is required prior to the one week, in-resident course.
|
|
|