LightSpeed Trained



Note: Course prices do not reflect the cost of the prerequisites. For detailed information click on the prerequisite course titles.

LightSpeed Pro (HP60, Pro16, RT, BrightSpeed) Upgrade   (Class/Lab)
R0022CT   36 Hours   $7,715.00

Prerequisite Course Material:

Executive Summary:
The LightSpeed Pro course is a one-week inresidence class with labs. This course is intended for Service Engineers who have LightSpeed training. It will equip the Service Engineer with system and subsystem theory and hands-on lab activities to address technical service issues for the newer 4/8/16-slice family of scanners (includes LightSpeed 4/8/16 HP60, Lightspeed 16 Pro, Lightspeed RT16/ Discovery 590RT/Optima 580W/Optima CT590RT, BrightSpeed 4/8/16).

Course Competencies:

  • Identify required tools and documentation for system service
  • Work safely in the LightSpeed Pro environment
  • Identify FRU part numbers, and replace common FRUs
  • Identify the installation steps and resources required for system installation
  • Perform system quality assurance checks and performance verification
  • Troubleshoot image quality issues
  • Perform tube change, alignments, calibrations, and image quality checks
  • Isolate system faults to the FRU level using system diagnostics
  • Perform planned maintenance procedures
  • Load software (LFC) during install or troubleshooting


Course Dates:
October 31 - November 4, 2011
March 5 - 9, 2012


Optima CT660 Service Upgrade (Web)
R0043CT   4.5 Hours   $2,590.00

Prerequisite Course Material:

Executive Summary:
This upgrade course taken online is intended for Support Engineers who have previous LightSpeed VCT Training.

Topics covered include:

  • Identify required tools and documentation for system service
  • Work safely in the LightSpeed Pro environment
  • Identify FRU part numbers, and replace common FRUs
  • New gantry display
  • New power saving mode
  • New gantry axial motor and control
  • New gantry covers removal and installation
  • Safety awareness with gantry cover mounting hardware
  • New operators console (RIO)
  • Load from cold-Saturn detector


LightSpeed VCT 32 and 64 slice   (Class/Lab)
R0030CT   36 Hours   $14,315.00

Prerequisite Course Material:

Executive Summary:
The CT LightSpeed VCT course consists of a oneweek in-residence class with labs. It is a differences class and is intended for Service Engineers who have previous LightSpeed Pro training. It will equip the Service Engineer with system and subsystem theory and hands-on lab activities to address technical service issues for the 32/64-slice family of scanners (includes LightSpeed VCT, LightSpeed VCT XT, LightSpeed VCT Select).

Course Competencies:

  • Identify required tools and documentation for system service
  • Work safely in the LightSpeed VCT environment
  • Identify FRU part numbers, and replace common FRUs
  • Identify the installation steps and resources required for system installation
  • Perform system quality assurance checks and performance verification
  • Troubleshoot image quality issues
  • Isolate system faults to the FRU level using system diagnostics
  • Perform planned maintenance procedures
  • Load software (LFC) during install or troubleshooting


Course Dates:
October 31 - November 4, 2011
November 7 - 11, 2011
December 12 - 16, 2011
January 16 - 20, 2012
February 6 - 10, 2012
March 5 - 9, 2012



top


Discovery 750 HD Upgrade   (Class/Lab)
R0036CT   36 hours   $15,345.00

Prerequisite Course Material:



Executive Summary: This Upgrade course is intended for service engineers that will be servicing and supporting the 64 slice Discovery 750 HD system.

Course Competencies: The course includes classroom presentations on theory and serviceability approaches and extensive hands on exposure to the new components of the 750HD configuration including:
  • Gemstone Spectral Imaging
  • Global Operator Console 6
  • X-ray tube with focal spot deflection
  • X-ray generator modifications

New service feature enhancements will be introduced and utilized throughout the course. Specific course content will include product software and hardware features that are available at the time the course is conducted.

Course Dates:
August 29 - September 2, 2011
November 7 - 11, 2011
March 19 - 23, 2012



top