Never miss a contrast bolus again. Fluoro-Triggered MRA gives the Radiologist or Technologist the ability to image the vascular anatomy of interest in real time and to see the arrival of the contrast bolus and almost instantly start the acquisition of a high resolution MRA exam. This powerful feature eliminates the need for test injections of contrast and works for all sizes of vessels. Rapid switching times allow the user to switch from monitor to scan mode in as little as 10ms to catch even the fastest flow. The system also supports a user defined "silent" delay period to allow the technologist to have the patient hold their breath for body angiographic applications. Fluoro Triggering is perfect for Elliptical Centric View ordering techniques where bolus timing is critical to optimize image quality.

• High spatial resolution contrast-enhanced abdominal/vascular images can be acquired with real-time switching enabled by this feature.
• One-button click inside Cardiac iDrive Real-Time Interactive user interface
• Sub 1 Second frame rates in monitor mode*
• Sub 1 Second minimum switching time to high resolution mode
• Gradients off during breath-hold instructions
  

* (frame rates are hardware dependent)

• Signa LX 1.5T or 1.0T with Octane computer and 9.0 SW
• Array Processor must be Reflex 50
• Requires IPG2 Board
• IDrivePro
• Not compatible with Base(SR20), Hispeed GRAM or EchoSpeed GRAM Gradients.
  

Note: Only applicable for Signa LX Version 9.0 Software!